Wood Fences

Fence Staining

  1. Interlocking stone, grass, shrubs etc…shall be covered for protection during fence staining
  2. Apply 2 coats of BENJAMIN MOORE (Arborcoat) solid latex stain . 

Calculate your Cost:

$10/ft  –  One side.  (100 ft minimum charge) 

ADDITIONAL/OPTIONAL CHARGES:

Top horizontal board – $2/ft 

Gates – $60/side

Power Sanding: INCLUDED

_______________________________________________________________

This pricing includes ONE colour only and 2 coats of Solid Stain (maximum height of 8′).

For SEMI-TRANSPARENT STAIN (the more expensive option) an on-site quotation is required.

Calculate your cost:

Each wood  fence panel/section is usually 8 ft , between fence posts.                 

Simply count the total number of panels/sections, then multiply by 8 feet to determine the final length of your fence.

Then, multiply the final length by $10 (or $12 if including the top board).

Example: 

10 panels/sections x 8ft = 80ft x $10 = $800 (not including top board)

10 panels/sections x 8ft = 80ft x $12 = $960 (including top board)

    

Call us to Schedule

Metal Fences

  1. All stone , grass, shrubs etc…shall be covered for protection during fence painting.
  2. Power sand all surfaces to remove peeling paint & loose rust.
  3. Apply red oxide metal primer to rusty areas of iron  fences….and appropriate galvanized prime to bare areas of galvanized metal, or aluminum  fences…..on both sides
  4. Apply Two  appropriate coats of rust-inhibitive oil based paint (low sheen) on both sides

Calculate your Cost:

$15/ft – both sides included. ( 50 ft minimum charge )

Prime bare metal with red oxide primer and paint metal fence both sides.

Note: Removal of loose paint, sanding and washing bare metal will cost an additional $60/hr

Labour & material & wsib are included in above pricing. Hst is an additional cost .

Note – both sides of any metal fence are included in this cost., (with a maximum height of 6 feet.)

Note – this pricing is for one colour only ….and yes…with 2 coats included…you can change the colour of your metal  fence(but choices are limited to 8 )

Note – Tremclad is the rust inhibitive paint we generally use …unless another manufacturer is your preference.

How To Calculate Your Cost:

Each metal “section”  will be an identical length  of almost all sections.

A ‘section” is determined as the fence  length  which sits between 2 metal posts.

Measure the length of one  “section” , and multiply it by the number of sections.

E.g.  you have 10 sections and each section is 10 feet long (10 x 10’ = 100 linear feet)

100 linear  feet @ $15 per foot =  $1500  as the  total cost of your metal fence ( before HST tax.